I am frequently asked by potential clients if it is “worth it” to replace their windows, and when is the “right time”. It sounds like a simple question, but the truth is, it really depends on what you value, the condition of your home, and your budget. Timing-wise, I don’t think there has ever been a better time for replacement windows. As I sit here in Milwaukee, it is 9 degrees outside and I can’t think of a better time for you to start saving money on energy-savings. According to the U.S. Department of Energy and HUD, 71% (on average) of a home’s heating dollars, and 40% of a home’s total energy is lost through windows and doors. Can you believe that?! Now don’t get me wrong, replacement windows are not going to save you that full 71% on your heating bill, however it is realistic to look for a savings anywhere from 15-50% depending on circumstances. That really is not chump-change. In addition, this time of year is the beginning of the slow season for window contractors, that means discounted prices, and quicker turn-around times. When you add in the federal tax credit of 30% up to $1500 back on your window purchase, I can’t think of any time when window replacement has been a better deal… Now, that being said, is it time to replace your windows? Here are a few questions to help you answer that: What is the age and condition of your existing windows? Is there any water damage/wood rot evident? This is an important factor, as this could (and may have already) lead to water infiltration in your walls causing possible structural issues as well as mold… Are your windows easily operated or painted shut? Are they an eyesore and possible detriment to the value of your home? If you answered “yes” to these questions, then it is time for replacement windows in your home. Check out my other posts on the next steps to take in the process. Good Luck, and stay warm!

When shopping for replacement windows today, there are a lot of different options in terms of materials and grades. The biggest problem with this is that everybody says that what ever they are selling is the best and everything else is junk. I’ve already talked a little bit about cutting through the bull and finding out about window quality, but what about material? The main choices available these days are vinyl and wood, with fiberglass and other composites forming sort of a niche market. The fact is, there is no single replacement window material that does not have some pro’s and con’s. Here is my very brief, and very general breakdown. First, assess your reason for purchasing new windows. Is it energy-savings, aesthetics, funtionality? Secondly, assess your budget. You will likely need to sacrifice something, especially if like most people you do not have unlimited funds.
The most affordable product line available is going to be vinyl windows. Vinyl windows have a very wide range of quality and options and should run anywhere from $225-$800 per unit (including installation) depending on grade and options. The main benefits of vinyl windows would be value. Vinyl windows will, without question give you the best “bang for the buck”. They will have the highest energy-efficiency (lowest u-value), the best warranty(usually lifetime), and cost less than wood or fiberglass. There can be a lot of drawbacks with poor quality vinyl windows such as warping, fading, seal failures, etc., however the higher-end, energy efficient vinyl windows that are available today have cured these issues with the use of higher quality materials and stricter standards.
The benefits of a wood product (and drawbacks of a vinyl product) would be the initial structural strength of the product, and the beauty of a real wood window. Vinyl windows have laminite wood-grains interiors available for the look of wood, however the truth is that there really is nothing as beautiful as a real wood window that can be stained to match your existing woodwork. Extruded aluminum exteriors have made wood windows a “low maintenance” option on the outside, however the interior will always need attention or risk rot. Wood windows usually start out around $500-$600 installed although a quality unit will run higher. A general rule of thumb is that a full-frame wood window will typically cost about twice as much as a vinyl replacement window. Wood windows can be very energy-efficient, however it is typically more difficult for them to achieve the low u-values available with a vinyl product. One thing to keep in mind is that some subdivisions and homeowner’s associations have requirements such as “all-natural materials” that can affect your decision.
Fiberglass and composite windows are fairly new to the market and do have some merit, however they are typically WAAAY overpriced. They have decent attributes when it comes to energy-efficiency and strength, however they really don’t deliver anything that you could not get in a high quality vinyl or even wood window, and they are typically the most expensive option.
The bottom line when it comes to choosing energy efficient windows, is that you really need to assess your own priorities and pick a product that fits your budget and your home, and as always, do some homework. There are thousands of people who have already made this purchase and have listed their opinions on blogs, etc. Good Luck!